Kemira Newsroom
A Cost Controller Answers: PPG Paints Arena Seats, Industrial Adhesives and Sealants, and Why Water Is a Universal Solvent
-
How many seats are in PPG Paints Arena?
-
Why do people search 'fan falls at PPG Paints Arena'?
-
Industrial adhesives and sealants: what's the real cost beyond the sticker price?
-
Adhesive solvent remover is more expensive than the label suggests — why?
-
Why is water known as a universal solvent — and does it matter for my budget?
-
What's the biggest TCO mistake small buyers make with adhesives and sealants?
-
How do I verify quality on a small adhesive or coating order?
Quick heads-up: this is a grab-bag FAQ. I get asked a weird mix of things — some about PPG Paints Arena (yes, the one named after the coatings company), some about the boring-but-expensive stuff I actually buy, like industrial adhesives, sealants, and solvent removers. I'm a procurement manager at a 250-person industrial fabricator, and I've managed our adhesives and coatings budget — about $310,000 a year — for six years. Everything below is from that seat, not from a press release.
Here's what's covered:
- How many seats are in PPG Paints Arena
- Why people search 'fan falls at PPG Paints Arena'
- The real cost of industrial adhesives and sealants
- Adhesive solvent remover pricing
- Why water is known as a universal solvent
- The TCO mistake small buyers make
- How to verify quality on a small order
How many seats are in PPG Paints Arena?
As of the 2024–25 NHL season, PPG Paints Arena seats 18,387 for Pittsburgh Penguins hockey. For concerts and other events the number flexes — figure somewhere in the 19,000 range once you account for stage configuration and floor seating. The building opened in 2010 and replaced Mellon Arena, which locals still call 'the Igloo.'
Yes, it's the same PPG whose coatings I buy. I've had more than one coworker assume 'PPG Paints Arena' is a division of the company or a marketing line item. It's not — it's a naming-rights deal, and the arena is owned by the Sports & Exhibition Authority of Pittsburgh and Allegheny County. Don't put it in your coatings budget line.
Why do people search 'fan falls at PPG Paints Arena'?
Because there've been reports over the years of spectators falling at the venue — escalators, stairwells, and at least one incident that got wider coverage. Honestly, I'm not sure of the exact details of the most recent one, and I'm not going to invent them. If you need specifics, the arena, the Penguins organization, and Pittsburgh local media are the sources to check — not a coatings blog.
What I can speak to is the boring procurement angle: if you're buying client tickets or organizing a group event there, build a contingency line into your event budget. Gate changes, weather delays, and last-minute venue policy shifts happen. I learned that in 2023 when a suite booking got moved and our 'all-inclusive' quote turned out to exclude about $600 in fees. Not arena-specific, but the lesson holds.
Industrial adhesives and sealants: what's the real cost beyond the sticker price?
Sticker price is maybe a third of the total. The rest lives in application labor, cure time, waste, disposal, and rework. I track this in a spreadsheet I built after getting burned on hidden fees twice, and the pattern is consistent: the gap between the cheapest quote and the one that actually works out to be cheapest is usually 15–40%.
Concrete example: I went back and forth between two epoxy systems for a structural bonding application in Q2 2024. Vendor A quoted $38/kg with a 24-hour full cure; Vendor B quoted $46/kg with a 4-hour cure. On paper A won by a mile. Then I factored in labor — at our shop rate, roughly 20 extra hours of fixture time across a production run cost us about $1,400 more than the material savings. B was the cheaper option, by roughly 12%. That's the kind of math that never shows up on a quote sheet.
One thing I'll say for smaller buyers: don't let a minimum order quantity talk you out of a test order. A $200 sample run that fails is a $200 lesson. A $20,000 production run that fails is a quarter. Start small, verify, then scale.
Adhesive solvent remover is more expensive than the label suggests — why?
The drum price is the cheap part. What gets you is what happens after the solvent's done its job: hazardous waste disposal, PPE, ventilation, and — depending on your state — VOC compliance paperwork. A 55-gallon drum of adhesive solvent remover might run $400–$900 depending on formulation and region as of early 2025, but disposal can add $150–$300 per drum through a licensed waste hauler, and that's before you count the labor and documentation time.
Honestly, I've never fully understood why the pricing swing between suppliers is as wide as it is. My best guess is hazmat logistics and regional distribution costs, but I've stopped trying to out-logic it and just quote three vendors every time.
If you're small, ask about pail sizes. A lot of suppliers will sell you a 5-gallon pail at a reasonable per-gallon premium, and for a shop doing occasional cleanup that's way better than sitting on a drum that goes stale.
Why is water known as a universal solvent — and does it matter for my budget?
Water dissolves more substances than any other common liquid. The short version: it's polar, it hydrogen-bonds aggressively, and it has a high dielectric constant — all of which means it can pull apart a huge range of ionic and polar compounds. It's called 'universal' with a wink, because it doesn't dissolve everything (oils and nonpolar stuff, famously, don't cooperate).
Why it matters for what I buy: it's the reason 'solvent remover' can't just be water for most adhesive cleanup, and the reason moisture control is such a big deal in adhesive and sealant specs. Water-based coatings are typically lower VOC but have different performance envelopes than solvent-based ones — you trade emissions compliance for sometimes tighter humidity and temperature requirements during application. If your shop isn't climate-controlled, that trade can cost you in rework.
It's also the reason 'just use water' is a bad answer to most cleanup questions, even though water is technically a solvent for a lot of things.
What's the biggest TCO mistake small buyers make with adhesives and sealants?
Accepting a quote that isn't itemized. If the vendor won't break out material, freight, application support, cure time expectations, and warranty terms, you can't compare it to anything. I require itemized quotes from at least three vendors now — our procurement policy says so, and I wrote that policy after a 'free setup' offer actually cost us $450 more in hidden fees back in 2022.
And here's the thing I'll go to bat on: small orders deserve the same treatment as big ones. When I was starting out, the vendors who treated my $200 orders seriously are the ones I still use for $20,000 orders. Small doesn't mean unimportant — it means potential. A supplier that won't quote a pail order is telling you something about how they'll handle a dispute later.
How do I verify quality on a small adhesive or coating order?
Three things: a certificate of analysis with batch traceability, a physical sample you can test before committing, and a spec sheet that references a standard you can check. For adhesives, ASTM D1002 (lap shear strength) is the one I see cited most often for metal bonding. For sealants, ASTM C920 covers elastomeric joint sealants. If a supplier can't point to a standard, that's information too.
For coatings, color tolerance is the classic trap. Industry standard for brand-critical color is Delta E < 2; Delta E of 2–4 is noticeable to trained observers, and above 4 is visible to most people. Reference: Pantone's color matching guidelines. On a small order, ask the supplier to state the target Delta E in writing — if they won't, assume it's 'close enough' and budget for a re-shoot.
Technical reading notes
When applying this update to a water treatment program, review site water analysis, metallurgy, target discharge limits, current SDS revision, and the internal approval route used by EHS and procurement. A single product name rarely carries enough context for a confident substitution decision.
Need the related document pack?
Ask Kemira for the SDS, TDS, regulatory statement, or trial checklist that matches your region and application.