Kemira Newsroom

Office Manager's Checklist for Buying Industrial Coatings: From PPG Product Lines to UN1789 Verification

Who this checklist is for (and the weird way I ended up using it)

If you're an office administrator who just got handed the facilities purchasing spreadsheet and there's a line item for “flexible protective coating” next to a UN number you've never seen—this is for you. I'm not a chemist. I'm an office administrator for a 240-person company, and I manage about $180,000 a year in facility and supply orders across 11 vendors. I report to both operations and finance.

I'm based in Pittsburgh, which means I drive past PPG Paints Arena (1001 Fifth Avenue, Pittsburgh, PA 15219—box office usually opens around 10 a.m. on event days) probably twice a week. For years I thought of it as “the hockey arena named after a paint company.” Then our maintenance lead asked me to source coatings, sealants, and a couple of specialty chemicals, and I realized PPG is also one of the largest coatings and specialty chemical manufacturers in the world. So the arena name stopped being trivia and started being a supplier I had to evaluate.

Here's the 9-step checklist I built after that project. It won't make you a coatings expert. It will keep you from getting reamed out by finance or, worse, by a safety inspector.

Step 1: Build the needs list before you type a brand name into the search bar

My first mistake was searching “PPG coatings” and then trying to reverse-engineer what my maintenance team actually needed. Do it the other way around. Sit with the person who'll apply the product and answer five things: what surface (concrete, steel, aluminum, wood?), indoor or outdoor, what's the expected service life, spray/roll/brush, and what's the failure mode you're protecting against (corrosion, UV, abrasion, water intrusion?).

If you skip this, every supplier will sound equally correct. They're not. A product spec sheet that looks identical at a glance can be for a rigid metal substrate versus something that expands and contracts. Which brings me to step 2.

Step 2: Understand what the brand actually sells—PPG is not one product

PPG's portfolio spans architectural paints, industrial coatings, automotive refinish, powder coatings, sealants, adhesives, and specialty chemicals. That breadth is useful and dangerous at the same time. Useful because if you're consolidating vendors, you might get coatings, sealants, and adhesives on one set of terms. Dangerous because the architectural paint at your local retailer and the industrial coating your maintenance lead needs have almost nothing in common chemically.

When you request a quote, ask for the specific product data sheet (PDS) and the safety data sheet (SDS) by product code—not by category. If the supplier sends you a catalog page instead of a PDS, that's a yellow flag.

Step 3: Verify environmental claims against FTC guidance, not the label

This is the step most office admins skip—and honestly, I skipped it the first time. A supplier told me a coating was “environmentally friendly” and I just wrote it in the comparison sheet. Then our compliance officer asked me what that meant. I had no idea.

Per FTC Green Guides (16 CFR Part 260), environmental claims need to be substantiated. For example, “recyclable” generally requires that recycling facilities are available to at least 60% of consumers where the product is sold. “Non-toxic” and “eco-safe” aren't free passes either—they need evidence. When a supplier uses vague green language, my new standard line is: “Can you send me the substantiation document for that claim?” About half the time, I never hear back.

Everything I'd read said premium pricing correlates with better environmental compliance. In practice, I found the opposite on one order—the mid-priced supplier had current third-party certifications on file, and the premium quote had a decade-old marketing sheet.

Step 4: Check the UN number and SDS before anything goes in a cart

This is the step that made me nervous the first time I did it. Our facilities team needed a hydrochloric acid solution for concrete prep work. I had no idea there was an ID number attached. Turns out hydrochloric acid solution carries UN1789 (CAS 7647-01-0), and it's classified as a Class 8 corrosive under DOT rules.

Per OSHA's Hazard Communication Standard (29 CFR 1910.1200), a compliant SDS must list the UN number and hazard classification in Section 1 and Section 14 respectively. If the SDS you're sent doesn't have UN1789 or an equivalent identifier on it, stop and ask why. (One supplier sent me a “generic acid cleaner” SDS with no UN number at all—turns out it was a diluted retail SKU, not the industrial grade our guys needed.)

For any corrosive, ask about storage, segregation, and whether your facility has a compliant cabinet. This is the step where “saving money” can get very expensive if something spills.

Step 5: Sort out the color question before you order

Our maintenance lead needed a specific brown for touch-up work on a handrail system. I naively asked the supplier “what two paints make brown” and got three different answers over email. Here's what I eventually understood:

Red plus green makes brown in pigment mixing (they're complementary colors, so they neutralize toward brown). Yellow plus purple also works. Blue plus orange is a third set. If you're trying to match an existing color, though, don't mix by rule—get a physical drawdown on the actual substrate and check it under both daylight and your building's lighting. I had one touch-up that looked perfect in our warehouse and visibly green under the parking lot floodlights. That was a $340 custom tint order I ate because I didn't ask for a sample first.

Step 6: Confirm you're getting a coating, not a paint, when the substrate moves

This is where flexible protective coating enters the conversation. A flexible coating is designed to bridge and stay intact on substrates that expand, contract, or flex—think roof seams, metal pipework with thermal cycling, or expansion joints. A standard rigid coating on those surfaces will crack, and then you're paying twice.

The tell is in the PDS: look for elongation percentage and tensile strength. If the PDS doesn't state elongation, it's probably not a flexible product. I'm not sure why so many suppliers bury this—my best guess is that sales teams aren't trained on the mechanical data and only know the marketing tagline. But the numbers are what matter, and if the supplier can't produce them, that's your answer.

Step 7: Get the total landed cost, not the unit price

Here's the transparency stance I've settled into after five years of this: ask “what's NOT included” before you ask “what's the price.” I've learned to distrust the lowest line item because the low quote almost always has a tail.

For coatings and chemicals, the tail usually hides in:

  • Freight and hazardous materials surcharges (corrosives like UN1789 are not cheap to ship legally)
  • Minimum order quantities that force you to buy more than you need
  • Disposal or empty-container handling fees
  • Rush fees that aren't listed on the standard quote

The vendor who lists all fees upfront—even if the total looks higher—usually costs less in the end. When I ran the numbers on our last consolidation, the “cheap” quote was 14% below the market, but once freight and HazMat were added it was 6% above the transparent one.

Step 8: Verify invoice capability before you place the order

I learned this one the hard way. In 2023 I found a great price from a new coatings supplier—$1,400 cheaper than our regular one. Ordered 200 gallons. They couldn't provide a proper invoice, just a handwritten receipt. Finance rejected the expense report. I ate the $1,400 out of the department budget. Now I verify invoicing capability before placing any order. W-9, remittance details, PO acceptance—all confirmed before the first shipment.

Step 9: Start small and test before you scale

The last step is the one most people skip because it feels like extra work. Place a small trial order—enough to coat the actual job surface, not just a metal coupon. Check adhesion, cure time, and color match in your real lighting. If the product has a recoat window, respect it; I've seen someone try to recoat outside the window and get lifting, then blame the supplier.

So glad I paid for the physical sample on the last big order. Almost skipped it to save two weeks, which would have meant coating 800 feet of handrail in a color that was visibly off under our parking lot lights.

Things that will trip you up (and how I handle them now)

Don't compare coatings on unit price alone. Coverage rate, solids content, and required coats change the math. A $40/gallon product with 50% solids at two coats can cost more per square foot than a $70/gallon product at one coat.

Don't accept “green” language without documents. The FTC Green Guides exist for a reason, and your compliance team will thank you for asking.

Don't ignore the UN number. If a supplier can't produce an SDS with UN1789 (or the applicable identifier) and the proper hazard classification, you're not buying what you think you're buying.

Don't skip color samples on anything visible. It's a $40–$80 cost that saves four-figure rework.

Don't place an order without a written quote that includes freight. Verbal estimates are not quotes. I keep a template now that asks “is this the final delivered price, including all surcharges and taxes?” in writing.

None of this turns an office administrator into a coatings engineer. It turns you into a buyer who doesn't get burned on the things that burn you. That's the whole goal.

Technical reading notes

When applying this update to a water treatment program, review site water analysis, metallurgy, target discharge limits, current SDS revision, and the internal approval route used by EHS and procurement. A single product name rarely carries enough context for a confident substitution decision.

Need the related document pack?

Ask Kemira for the SDS, TDS, regulatory statement, or trial checklist that matches your region and application.